This is a carrot knife/gravity knife where I've modified the blade to hold an iPhone 15 Pro Max.
Highlights and remix details:
- It's a giant phone case that can flick your phone out in one hand
- You can use the base of the knife to hold up your phone
- The blade, the two halves surrounding the blade, and the screws can all be printed in different colors
- This can be printed on one plate (but you may opt to split the print across plates)
- I've found that the smaller screws from the original model did fit but were a bit tight, so I've scaled them down to 90%
- 95% and 100% scaling for the small screws do work if you prefer the screws to stick out
Additional notes:
- I suggest getting the phone into the case by slotting the phone in from the bottom side and then pressing down on the top side
- To get the phone out, I find it easier press down on the cameras to pop the phone out
- Do not overtighten the screws – the small screws are prone to breaking if forced too much
- You cannot charge the phone (wired or wireless) with the case on
- Because of how large this is, flicking the phone out can be pretty loud
- While this is a novelty toy, please be considerate about where you play with it