RC Servo Robot Arm by Creative Electronics

Creative Electronics

Hobby & DIY>Robotics

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.8 h

1 plate

4.0(1)

Boost

Released

Description

I made a remote controlled Servo Robot Arm.

I made a video about this awesome project: DIY RC Servo Robot Arm

Here you can see how I designed the robot arm: Inventor Design Tutorial

Materials you need:
- 2x FS90 Servo
- 1x FS90R Continious Servo
- RC System (I use Carson with 3 channels)
- 7,2V Li-ion Battery
- 3D Printed Parts
- Micro Servo Gripper: Micro Servo Gripper

Bolts and Nuts:
- 4x M5x30 Bolts
- 2x M5x20 Bolts
- 4x M5x12 Bolts
- 8x M5 Nuts
- 1x M4x12 Bolt
- 4x M3x12 Bolts
- 3x M3 Nuts

Comment & Rating (4)

@Gengis

Print Profile

0.2mm layer, 2 walls, 15% infill

works fine but a little flimsy

The designer has replied

@CE_YT

Thanks for printing!

@user_2903873299

It would be better if you made a detailed guide to follow along with that explains what needs to go where, rather than just a video with no explanation.

The designer has replied

@CE_YT

It are 2 videos and the DIY video do has explanation, you can turn on English subtitles, you can exactly see where every part needs to be ;) Try watching the desing tutorial, which is an animation where you can see every bolt and nut and part, that's basicly a video manual. DIY video: https://www.youtube.com/watch?v=gyD0kDRw29Y&ab_channel=CreativeElectronics Design video: https://www.youtube.com/watch?v=px_ch9u-ycg&ab_channel=CreativeElectronics

No more