I was really disappointed with the Spektrum DX8 Monitor mounts I have found, so I decided to design my own. I have designed this primarily for use with the Flysight Black Pearl monitor but it should fit most others.
I have also designed a mount for the Futaba T8J to do the same job, but its very different. https://www.thingiverse.com/thing:3219989
you will need 2x cable ties to secure it to the rear handle and the bolt to screw in to the monitor, these can easily be found on eBay.
I was really disappointed with the Spektrum DX8 Monitor mounts I have found, so I decided to design my own. I have designed this primarily for use with the Flysight Black Pearl monitor but it should fit most others.
I have also designed a mount for the Futaba T8J to do the same job, but its very different. https://www.thingiverse.com/thing:3219989
you will need 2x cable ties to secure it to the rear handle and the bolt to screw in to the monitor, these can easily be found on eBay.
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20
Filament: Prusa Prusament PLA black