Bird Buddy large perch + large suet holder by DMarten

DMarten

Household>Garden

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.20mm layer, 6 walls, 15% infill

Designer

39 min

1 plate

4.0(1)

Boost

Released

Description

Perch creates better footing for the birds while moving the mounting point of the large suet holder back. This improves camera focus and creates more room for accessing the main feeder. REQUIRES AN M5 X 0.8 TAP AND DIE TO MOUNT THE SUET HOLDER BASE TO THE PERCH. If you want to mount the suet holder directly to the existing feeder, I have a version with a hole for an M5 x 0.8 bolt you can also download.

I printed the perch on the textured PEI plate, which gives the top a nice finish. The textured PEI plate require adhesive for ASA to stick to it.

Comment & Rating (2)

@Shadowmantis

Print Profile

0.20mm layer, 6 walls, 15% infill

cool model perch came out great. the supports for the suet holder are super hard to remove tho

The designer has replied

@DMarten

I originally had the support Z distance set higher, which made it easier to remove the supports, but I didn't like the print quality. For those looking to print this in the future, I used a needle nose pliers to pull off the support interface material and that helped a lot.

No more