Voyager - Intrepid Class by martin.taichl

martin.taichl

Hobby & DIY>Vehicles

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

All parts separate_0.12mm layer, 3 walls, 10% infill

26.5 h

7 plates

5.0(7)

0.16mm layer, 2 walls, 10% infill

65.4 h

4 plates

4.6(9)

only A1 mini compatible parts_0.12mm layer, 3 walls, 10% infill

9.1 h

6 plates

Boost

136

236

588

569

Released

Description

This is 3D printable model of the Intrepid Class NCC-74656 Voyager from the Star Trek. The model has the variable geometry pylons so it can be displayed with the pylons down or up like in a warp.

It is a kit so no glue needed. The different colored parts are separated for easier printing.
Pieces of the necelles and some details need to be separated into separate models in the slicer ;)

In the suffix of the files, there are color codes:
bl-blue
d-dark
o-orange/bronze
b-black
r-red

Files without the sufix are done with grey color

For the assembly, please have a look at the following video:

Comment & Rating (41)

@geniejhang

Finished printing! It’s just gorgeous! Thank you!

The designer has replied

@martin.taichl

woow. Incredible finish. ;)

@ricreaven

Wow that looks amazing, its an awesome model! How did you make the layer lines disappear, it looks so smooth?

@antivenom

wow looks great. what filament and colors did u use

@DenoD

Print Profile

All parts separate_0.12mm layer, 3 walls, 10% infill

Love the model! it’s fantastic! I created a different mount for it so it attaches to the wall and can be displayed in different angles, check it out: https://makerworld.com/en/models/416638#profileId-318925

@user_2772647424

Yours came out great. What filament did you use for the main body?

(Edited)

@DenoD

Replying to @user_2772647424 :

I used the original grey basic filament from Bambu.

@falconius

Print Profile

0.16mm layer, 2 walls, 10% infill

Excellent, the back end took a couple tries. should use the breakoff support material for the seams.

(Edited)

The designer has replied

@aussy101

Boosted

what part ? I’ll correct the issue . I typically use petg for break off these days as it’s cheaper but I can add both

@falconius

Replying to @aussy101 :

The first one I did i inadvertently had a regular PLA at the support/interface layer, ID10T error, fixed that in the slicer, then i proceeded to lop off the key pegs while taking off the support/interface material. Im not sure what you can do about that, i should have added a couple more wall loops, and been a little bit more careful. But oh well turned out amazing regardless. i used translucent teal/gemstone Atomic PLA for the dish, windows, and nacelles

@litlclutch

Print Profile

0.16mm layer, 2 walls, 10% infill

had bit of trouble with the nacelle mounting but after a reprint and some drilling out it was great… if a bit too loose. chocking all issue up to my being new to 3D Printing.

The designer has replied

@aussy101

Boosted

beautiful ship

@litlclutch

printed this for a friend of mine that Voyager was her Fav Star Trek, giving it to her on Thursday but I think it turned out great… now I’m gonna be printing all the ships, Star Trek, Gate, Expanse… think you just tied up my printed for the next year, lol

The designer has replied

@martin.taichl

niiice. ;)

@rodrigo.pontes.

Great print.. I had a minor issue with the connectors on the necelle where it was tapered thin making difficult for the peg to go all the way

@rodrigo.pontes.

I am having a slightly problem with the pins/holes(😂) the it seems to be tapered and the pin it is not.. I wonder if it is my printer or what.. anyone have any idea .. use the settings as it changed the printer to P1S 0.4mm printing using Polymaker PolyTerra

@Vext22

Print Profile

All parts separate_0.12mm layer, 3 walls, 10% infill

very nice, it turned out Beautifully. I had to add brims to a few of the smaller pieces to help with adhesion, but all good

@david.vidm4r

Print Profile

0.16mm layer, 2 walls, 10% infill

Prints greats and looks stuning. I used the cheapest filment that seller gave me for free when i bought the printer and it’s stil gorgeous. Will definetly repeat a proper print.