Model is meant to be used as a 360 degree rotatable mount for whatever is needed. My initial plan was to use this to hold i2c lcd's on robotics projects toe help with easy troubleshooting. 2020 Extrusion is very easy to print and using it with electronic components for quick and easy mounting with smaller hot swappable plates makes things organized and clean while prototyping. I prefer using this type of system over the general prototype plates with a thousand holes in everything. Most of the time those holes don't always line up with the electronics parts and doesn't allow for any movement.

This model is built for 2020 Aluminum extrusion with M3x8 screws for the V_nuts and a single M3x10 or M3x12 screw to lock the position of the external cylinder.

If you'd like the full files to further customize things yourself, feel free to reach out. I made everything in TinkerCAD so I'll have to share it through that if you want more than just the STL.

Let me know if you have any feedback, I've been modeling things for personal use for awhile but this is the first time I've shared anything. I know it's a pretty niche project.