Bambu Lab small Storage System

Here we have an extension of the first storage system that was designed by me.

The first set was about storing the parts that come with the printer from Bambu Lab. With this smaller box you can store parts that you can print yourself. Mainly useful parts that are needed for maintenance or replacement of PTFE connections.

The demensions of the box are as follows:
117,5mmx95,5mmx33mm

The following parts can be accommodated:

- Bambu Disconnect Tools for AMS Power, AMS PTFE as well as Buffer Outlet Fork

https://makerworld.com/de/models/14462#profileId-21419

- Tool Head Cover Hanger

https://makerworld.com/de/models/17030#profileId-15789)

- two Pro Clip Filament Chip / Low Profile https://makerworld.com/de/models/30298#profileId-33227

- Small parts like PTFE Connector or as shown in the picture Lubricant Grease or Thermal Grease.

The goal was to design the box as space-saving as possible.

The two parts are not joined together, the lid is just put on.

Have fun printing!