This is a model of using IKEA EKET furniture to make a Filament Shelf.
Can hold up to 27 pieces of 1kg filament.
(Picture from IKEA)
The materials required are as follows:
1.IKEA EKET (70x35x70 cm)
2.Wooden rod x4 with a diameter of 15mm and a length of about 655mm
3.M4x10mm tapping screws x8
I designed a model for positioning that doesn't require any measurements to hold the wooden rod holder in the correct position.
----------中文解說----------
這是一個利用IKEA EKET製作的耗材收納櫃
需要的材料如下:
1.IKEA EKET櫃子 (70x35x70 cm)
2.直徑15mm 長655mm木材棍4支
3.M4x10mm 自攻螺絲8個
如上方照片,我設計了一個定位板,因此不需要任何的測量即可簡單的將掛勾固定在正確的位置上.
Happy printing!