Bambu Lab Cereal Dry Box
Remixed by
Copyright Claim
Bambu Lab Cereal Dry Box
Remixed by
Boost
20
54
22
Print Profile(6)
Single Color - 0.2mm layer, 2 walls, 15% infill
Designer
9.2 h
6 plates
Dual Color x2 - 0.2mm layer, 2 walls, 15% infill
Designer
14.2 h
6 plates
Dual Color - 0.2mm layer, 2 walls, 15% infill
Designer
13.2 h
6 plates
Single Color x2 - 0.2mm layer, 2 walls, 15% infill
Designer
9.2 h
6 plates
Click to see more
Boost
20
54
22
0
96
132
Released
Description
Couldn't find a dry box I liked on Makerworld so I remixed one to my needs. Below are links to the parts I used.
Changelog:
- Changed labels to be embossed vs concave
- Made the desiccant holder longer and a little skinnier to fit better in the center.
- Made the socket deeper where the rollers rest
- Added profiles to print 2 spool holders at once
- Widened hole on spool holder slightly where labels go
- Added a blank label
Cereal Boxes:
https://www.amazon.com/dp/B09ZLBJQDW
Hygrometer:
https://www.amazon.com/dp/B08P3QJJZL
Bearings:
https://www.amazon.com/dp/B07216D1SZ
Desiccant:
https://www.amazon.com/dp/B01I5Y9H6A
PTFE Coupler:
https://www.amazon.com/dp/B01IB81IHG
Comment & Rating (22)
All
Hello, I'd like to know which spool to use. None of my spools work, they are all a little too wide.
The designer has replied
1
Reply
I am using Bambu, Sunlu, Elegoo, and eSun in it currently. If you measure the width of the spool you're using I can make a slightly wider version.
0
Reply
Replying to @ElJeffe
humm probably something wrong from me. I have 53mm....do you have the aame distance ? the measure of my bambu spool is 60mm.
0
Reply
Replying to @francislej
The slides should be about 66mm total with the wheels right at 55mm. I'll run out to my shop and measure what it printed at for me will take a couple pics too.
1
Reply
Print Profile
Single Color x2 - 0.2mm layer, 2 walls, 15% infill
Easy to print and assemble for a beginner like me.. Uses commonly available ball bearings. Printed on a P1S using Bambu Grey PLA Basic. Humidity dropped to under 10% almost immediately. I am using molecular sieves instead of Silica beads.
Has anyone re-mixed this to print tha base as a single part, rather than 2 interlocking parts?
The designer has replied
0
Reply
I only have a A1 Mini but I can add a profile to make it one part instead of two.
0
Reply
Replying to @ElJeffe
Ah, I gotcha. This will give me a chance to play a bit with the software and see if I can put it together.
If I get stuck, I'll ask for one.
Thanks!
0
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill
Printed well! I rearranged parts to different plates.
(Edited)
The designer has replied
0
Reply
I tried to cram everything into a single file so people could print the plates they needed. It's a little chaotic like that though lol. Glad to see it printed well for you too!
0
Reply
where do u put the desiccant in? just in the box?
The designer has replied
0
Reply
Yes just in one of the little boxes that sits along the bottom. They are included on the plates with 2 different versions.
0
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill
Perfect print
0
Reply
Print Profile
Dual Color x2 - 0.2mm layer, 2 walls, 15% infill
Perfect print
0
Reply
Print Profile
Dual Color x2 - 0.2mm layer, 2 walls, 15% infill
Worked great for me. Used the V2 roller arms to fit Bambu spools.
Thanks
0
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill
Strength Issue:
Pretty good but found this to be extremely delicate, esp pushing the hygrometer in, it'll easily snap
0
Reply
Print Profile
Dual Color - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
© 2024 MakerWorld