ORGANIC RING
ORGANIC RING
Boost
187
332
76
Print Profile(5)
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Designer
30 min
1 plate
0.2mm nozzle, SLOW
Designer
35 min
1 plate
0.16mm layer, 2 walls, 15% infill
15 min
1 plate
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
39 min
1 plate
Click to see more
Boost
187
332
76
3
697
728
Released
Description
ORGANIC RING WITH A VERY SPECIAL DESIGN THAT RECALLS THE SHAPE OF A SKELETON.
TO CHANGE THE SIZE OF THE RING, YOU JUST SCALE IT IN THE SLICER, WITH A 100% SCALE THE INTERNAL DIAMETER IS 23mm
FOR A PERFECT PRINT I RECOMMEND USING A 0.2mm NOZZLE
PRINT SETTING
- Nozzle Size: 0,2mm
- Layer Height: 0.06mm
- Vertical Shells: 3/4
- Top/Bottom Layer: 9 / 7
- Infill: 15%
Comment & Rating (76)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed fine on my P1S with PLA, but this ring is very fragile. I broke it within an hour.
1
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Looks good but is not so comfortable to wear.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
turned out a bit broken
0
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
turned out okey ish a bit of stringing and a part broke
0
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
good with 0.4 nozzle too
0
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Printed a couple of these now using TPU. They print great and are very comfortable. Good work. I added the TPU profile I used to print as well.
(Edited)
0
Reply
Print Profile
0.2mm nozzle, SLOW
Good
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
perfect and fast printed in different scales
0
Reply
Print Profile
0.2mm nozzle, SLOW
très fine, beau résultat
(Edited)
0
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Nice print
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld