Modular Target by Zurlingo-3D

Zurlingo-3D

Toys & Games>Other Toys & Games

GIF

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

3 Targets, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Designer

1.7 h

1 plate

4.5(12)

1 Target, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Designer

48 min

1 plate

4.9(7)

2 Targets, 2 Colour, 1 Plate, layer, 2 walls, 10% infill

Designer

1.2 h

1 plate

Boost

137

104

Released

Description

A Print In Place, Modular Target For Band Blaster Or Rubber Band Crossbow.

Features:

Print in place
Modular design - Add as many target as you want in a chain!
Reset all targets with 1 finger
Screw holes for mounting (If required)
Quick and easy print
Multi colour by mix and matching parts
AMS painted bullseye

Assembly:

When using the targets individually, they print pre assembled. All you need to do is gently free off the hinges with your fingers and add a wood screw into the hole at the front of the target.

The screw is purely there as a counter balance and can be adjusted to suit the weight of your rubber bands or other projectiles.

You can precisely tune the weight of the targets by either winding the screw into the hole further or changing it for a longer screw entirely.

When assembling more than one target in a chain:

Continue this for as many targets as you want to add!

I'm confident these target will also work for airsoft guns, but I can't personally test this as I don't have access to any myself.

It would be great if one of you could test this and post the results either way :)

Thanks for looking!

Please post any makes in the comments section and don't forget to review your experience :)

Comment & Rating (23)

@Robbicon

Print Profile

3 Targets, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Printed good and works fine, but I couldn't manage to connect several, it‘s a bit to tight to clip it together. Do you allow to remix your band blaster? I like it but i added something.

(Edited)

The designer has replied

@Zurlingo3D

There is a bit of a knack to clipping them together, and after you do it once, it should make more sense! lol It takes quite a lot of pressure in the right place to pop the joints together. No public remixes sorry, but you're obviously welcome to do whatever you want for your own personal use :) Thanks for printing!

@christianhartwi

Print Profile

3 Targets, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Great Job.

@user_2111154185

Print Profile

3 Targets, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Good model, needs supports.

(Edited)

@Jakes3dPrintSho

this is really cool. but may I add a suggestion is to make the actual target an insert in case it breaks you can simply print another one and slip it in. heck I would just print hundreds and shoot with a real gun lol

The designer has replied

@Zurlingo3D

I have a better idea if you want disposable targets like these? I'll upload something soon! ;) Thanks for printing!

@user_1319085816

Print Profile

1 Target, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Works well, but was smaller than I expected

@lckaley

Print Profile

3 Targets, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Printed fine except the color didn't work as displayed. It printed a couple layers in green then did the rest in red.

@mmatze23

Print Profile

1 Target, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

The designer has replied

@Zurlingo3D

Thanks for printing!

@andwoh

Print Profile

3 Targets, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

@alexdorand

Print Profile

1 Target, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

@user_2780261686

Print Profile

3 Targets, 2 Colour, 1 Plate, 0.2mm layer, 2 walls, 10% infill

Strength Issue

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

cloud box · magnetically stackable · modular

Print Profile(3)

Description

Comment & Rating (23)

License

Related Models

cloud box · magnetically stackable · modular

RoadBites Modular Food Station

Spring Gun V2 - Shoots fake bullets with magazine

Ammo Box & Targets for Plinker V2.0