Cable Management Box by:“Borderbox_7414” BambuStudio -Ready!

-Hide your power strips with this simple and sleek box. Doubles as a display shelf!

-Normal sized cable box as found on the market. (100mm deep x 398mm wide x 135mm height)

-Choose a textured build plate for a nice look for the lid!

-Friction based assembly! (see pictures)

-Assembly: There are 7 “friction clips” in total that hooks the parts together.

-This is a big and flat print. Warping is a possible outcome. Glue on the build plate helps a lot too and I recommend that you use it while prinding the base! If you are using any filament branding other than BBS - Follow the nozzle and build plate temperature recommendation by the company you're using to prevent warping!
Prints fine with BBL PLA. Other fillaments shouldn't be at problem!

Made by: “Borderbox” on Printables!

-Brim
-15% Infill (Gyroid)
-0,2mm LH
-2 walls
-0,4 nozzle