Hi…

This is a Ikea Skadis (and all accessorys you can find here) compatible Plate for mounting on the side of a Bambu X1C (P1 should work aswell).

You need two 10x4mm magnets to keep the plate in position. It's designed to lay on the upper corner but it's still possible to open the lid.

The plate is 240x180mm. Just add Holders as you need. Plier, allen keys, whatever… There are holder for everything you can imagine… the whole Skadis Universum is usable!

If you got a make please show it. :)

*I personally prefer double-sided duct tape put it's up to you if you want to use the magnets. Be shure to get powerful magnets, the first i got were to weak. :). If you want to use duct-tape just print two of the magnet replacement inserts (uploaded it to the raw files).

For the 2 Color Version i needed a little trick to get white Brim! If you only load 2 Colors the Brim is green :(

I used White/Green/White in my AMS and so i tricked the system. Green Brim on a white plate leaves some rest color… I would say it's a Slicer Error…

Thanks!