This is the long (running front-to-back) divider for the shallow Packout drawers.

I'm providing both a single piece and a split version. The single piece can be printed in a Bambu Labs X1C, placed diagonally. It will probably warp at the ends, so I highly recommend the two piece version and optional bit of super glue. I added a bevel to the bottom edge so the divider can be printed upside down, vertically with no support.

Links to all my drawer dividers:

These parts didn't design themselves, please show your thanks with a “like” ❤!

Designed in OpenSCAD. Commercial use only with attribution!