Children Screw & Nut Training Toy / Fidget Toy (M21x50)
Remixed by
Copyright Claim
Children Screw & Nut Training Toy / Fidget Toy (M21x50)
Remixed by
Boost
11
36
12
Print Profile(3)
2 Sets | 0.12mm layer, 3 walls, 15% infill
Designer
1.7 h
1 plate
1 Set | 0.12mm layer, 3 walls, 15% infill
Designer
54 min
1 plate
for A1 Mini
Designer
2.5 h
1 plate
Boost
11
36
12
0
42
75
Released
Description
This is a compact variant of wherenseb's M42x100 screw, tailored for younger children. Initial assembly might require a bit of effort due to tight tolerances; however, after one or two full cycles, it becomes much smoother. Once accustomed, it's quite effortless and gratifying to put together.
Comment & Rating (12)
All
Print Profile
1 Set | 0.12mm layer, 3 walls, 15% infill
printed on BL PLA-CF and looks great at this resolution and yes tight fit but run it through several times and it'll smooth out. Mine has no play once all threads are engaged, but I prefer that so it's pressure fit.
0
Reply
Print Profile
1 Set | 0.12mm layer, 3 walls, 15% infill
very tight fit. I had to reprint with the nut scaled to work
0
Reply
Print Profile
2 Sets | 0.12mm layer, 3 walls, 15% infill
Prints really well. A bit tight at first but a few runs down the threads and it's great. Fun tactile toy for young kids too.
0
Reply
Print Profile
1 Set | 0.12mm layer, 3 walls, 15% infill
The designer has replied
0
Reply
Thank you for dedicating a moment to provide your valuable feedback on this profile!
0
Reply
Print Profile
1 Set | 0.12mm layer, 3 walls, 15% infill
0
Reply
Print Profile
2 Sets | 0.12mm layer, 3 walls, 15% infill
0
Reply
Print Profile
2 Sets | 0.12mm layer, 3 walls, 15% infill
0
Reply
Print Profile
1 Set | 0.12mm layer, 3 walls, 15% infill
0
Reply
Print Profile
1 Set | 0.12mm layer, 3 walls, 15% infill
(Edited)
0
Reply
Print Profile
1 Set | 0.12mm layer, 3 walls, 15% infill
0
Reply
Remixes (1)
Related Models
© 2024 MakerWorld