Stick with hole for holding while cutting and for hanging.

Version with text and without text. You can import the text AND the jig at the same time into bambu studio and keep them as the same object so they move together (which is how it's setup in the 3mf I included) or just not put in the extra text extrusion and print it as a bridge.

NOTE: most of the versions are designed for mini routers - i strongly suggest you measure your router base before deciding which version to print (I do have some slightly larger ones for larger router bases)

They use a little more plastic and take a little longer to print, but I like that they're easy to use and hang and to hold in place.

Includes 10mm of straight/dead space on either side so you don't chop up the jig with the router.

6mm thick plate so the router has plenty of height space to chill against the jig.

Clips that will fit on ½ and ¾" wood to hold the jig in place

7mm thick clips to hook around the corner of the anchor

Sizes included (measured as circle radius): 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm

If people burn for other sizes, lmk and I might toss them up.

VERSION EXPLANATION

No Text : Some kind of earlier iteration. These don't stack.

With Text, Not Stackable: Functional but don't all hang nested together at the same level

With Text, Stackable : RECOMMENDED VERSION. Some of the handles have been extended to allow the pieces to nest into eachother like measuring cups while hanging.

Larger Router Version: Stackable version that's a bit larger for people with real-sized routers (not the mini one I have)