Drag Chain for Flying Bear Ghost 5 Catena Portacavi

Drag chain installation system for Flying Bear Ghost 5.

The entire project can be installed on the 3D printer either with the original Bowden configuration, or with the direct drive Orbiter or direct drive Sherpa mini modification.

A minimum of 19 links are needed for the drag chain.

Purchase list necessary for the correct assembly of the mod: [1x] Drag chain 10x11 R18 - Alternative link [5x] DIN7991 M3x10 screws [5x] DIN7380 M3x12 screws [4x] DIN7380 M3x8 screws [9x] Dadi DIN934 M3 Nuts

Tools needed: allen wrench hex 2.0mm [included with Ghost 5 printer]

Contact me for any doubts and/or problems during installation Constructive criticism are welcome