Quench your thirst for creativity with this DIY Aperol Spritz LED sign – a vibrant burst of homemade brilliance! Crafted in the spirit of ingenuity, this eye-catching masterpiece is not just a sign; it's a testament to the power of good vibes and creative libations. Sparked by the desire for a unique gift, I mixed a splash of innovation with a twist of DIY spirit, turning a simple idea into a dazzling LED beacon of friendship. Now, your space can glow with the same effervescent charm without the hefty price tag. Cheers to the joy of making, the zest of Aperol, and the radiant glow of shared moments! 🍹💡 #MakerWorldMagic #DIYDelight

What do I need?

1. ~700g of your finest colored filament (I used Orange Amazon Basics PLA)
2. ~100g of White filament (I used Pearlwhite Amazon Basics PLA)
3. A wooden Board of at least 50x80cm (19,7x31,5in) (I used a Oak board with a dark finish)
4. A LED Strip (I bought a 30m one but had very much leftover)
5. Some woodscrews with a diameter of about 2-2,5mm (I used 18mm long screws, because my board was 20mm thick)
6. A drill with a few wood drills
7. Patience while aligning the letters on the board

I printed everything and got the supplies, what now?

1. Align the letters on your board and mark the holes → then drill
2. Mark spots for bigger holes (where you insert the LED strips) → then drill
3. Screw the letters to the board
4. Stick the strips inside of your letters
5. Put on the diffusors (they are made to snap in place, so no glue is needed!)
6. Enjoy the view while having the third Aperol Spritz!

I can't really describe the steps in depth, because I assembled the sign in a little rush, but unlock the secrets of this DIY Aperol Spritz LED sign – just remember, what happens inside stays inside, like a well-guarded mixologist's recipe. Craft with flair and embrace the joyful chaos within! 🍹💫