AI generated stormtrooper for Hueforge. I liked the added pop of color, but feel free to change up the color however you'd like.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Protopasta Black Transmission Distance: 0.5
PLA PolyTerra Lava Red Transmission Distance: 1
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Lava Red
At layer #8 (0.72mm) swap to Ash Gray
At layer #17 (1.44mm) swap to Jade White for the rest.