Summary

OUTDATED DESIGN !!!
I recommend to print the uni-X Wade instead http://www.thingiverse.com/thing:25416

I was always wondering why there are so much different Wade`s and never knew exactly which one is the right one to print.

Therefore i tried to make one Wade that will fit (nearly) all Mounting plates and hotends.

The insert hole dimension is d=16,7mm height = 20mm

The Wade itself is designed to work with 3mm ABS/PLA, if you want to print with 1,75mm material just buy a small brasstube (d=2,1mm D=3mm) and put it between the hobbedbolt and the hotend.

The inserts are made d=16,4mm height= 19,9mm

if there are some dimensions wrong or some weak points please tell me and i will try to fix them.

EDIT3: New V2 Uploaded. (13.05.2012)

Fixes:

Holes for Orca v040 X-Carrier
small bridge to the Idlerholderpart (for easier printing)
countersunk holes for insert screw`s
tested on Orca V 0.40

Instructions

Just print the whole Wade and the Insert of your choice.

Mounting holes are for:
Std Mendel/Prusa 50mm ?!?!
Orca V 0.20 ? 0.30 and 0.40 (will not fit v42, has already an geared extruder )
If you want to add a coolingfan on Orca v.040 you have to mount the wade straight which requires an additional hole at the carrier plate.

Hotends that should fit:

All with Groovemount
J-Head d= 16,7mm h=10mm
Hotends with d= 10mm h=20mm like Reprapfab / Geeksbase V1
- Do not use std. screws for this !!! , make a small iron insert or at least make the thread square
Mendel-Parts V6/V9/V10
Arcol.hu V2/V3/V4
Hotends with 30mm Screws (distance)
Actually all Hotend using the same dimensions