Reggie The Robot - Print-In-Place by Zurlingo-3D

Zurlingo-3D

Toys & Games>Characters

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

6x REGGIE With Name, 4 Colour Painted AMS, 0.2mm layer, 5 walls, 12% infill

Designer

5.8 h

1 plate

4.5(2)

REGGIE With Name, 4 Colour Painted AMS, 0.2mm layer, 5 walls, 12% infill

Designer

1.7 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 20% infill

1.4 h

1 plate

Boost

Released

Description

Meet Reggie The Robot! - The loveable, print in place, fully jointed robot toy!

Easy to print, has been tested down to 60% scale but your printer has to be really dialed in for success.

80% Scale Takes Roughly - 1h:22m

100% Scale Takes Roughly - 2h:15m

Bear in mind 100% scale is still small! - 73mm from head to toe, so you may want to scale up to 200/300% at a 0.3 layer height, for a really robust Reggie.

I really hope you enjoy this design! It's taken a fair few iterations to get a reliable, robust print and I'm really happy with the end results.

Any questions, please comment and I'll reply asap :D

Have Fun!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Supports:

Resolution:

0.2

Infill:

20%

Filament:Various PLA+ Multiple

Notes:

A good first layer is essential. Make sure there are clear gaps around the joints, otherwise breaking them free can be tricky. If you struggle with this, raise your Z offset by 0.05mm And test again.

Post-Printing=============