Materials:

1. Lightweight plastic material (36 grams)
2. PLA, ABS, or PETG filament with support

Tools:

1. 3D printer
2. 36 grams of filament
3. Screwdriver
4. drywall screws
5. Measuring tape and level (not necessary)

Instructions:

Design Phase:

• Utilized online images for inspiration.
• Created a 3D design considering the lightweight requirement and compatibility with PLA, ABS, or PETG.
• Ensured the design includes support structures for added stability.

3D Printing:

• Load your chosen filament into the 3D printer.
• Use the 3D design file to print the bracket.
• Monitor the printing process, ensuring support structures are formed as intended.

Post-Printing:

• Carefully remove the printed bracket from the 3D printer.
• Clean up any excess material or support structures with a screwdriver.

Testing:

• Confirm the lightweight nature of the bracket (aim for approximately 35 grams).
• Assess the stability and strength of the bracket, ensuring it can hold the intended weight.

Installation:

• Measure and mark the desired location for the bracket on the wall.
• Use a screwdriver to securely attach the bracket to the wall.
• Ensure the bracket is level and stable.

Recycle Bin Placement:

• Hang your recycle bin or ladder on the bracket, testing its capacity and security.
• Adjust the placement if necessary.

Enjoy the Benefits:

• Admire your DIY Plastic Recycle Bin and Ladder Wall Bracket that you've created from scratch.
• Revel in the satisfaction of solving a problem through creativity and resourcefulness.

By following these instructions, you not only address a specific need but also contribute to a cleaner, more organized space. Embrace the DIY spirit and share your creation with others who might be facing the same challenge. Happy crafting!