The Mouse - Bambu Lab Mouse Kit Compatible by Jorge Rui

Jorge Rui

Tools>Gadgets

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

12.7 h

4 plates

4.3(42)

0.2mm layer, 2 walls, 12% infill

Designer

1.7 h

1 plate

5.0(1)

Boost

155

248

902

385

Released

Description

Introduction

Disclaimer: This model is part of the Creator Program, when you purchase the Wireless Mouse

Components Kit-002 through the links below, creators may earn an affiliate commission as a reward of their

work.

Hardware Kit: Wireless Mouse Components Kit 002

Recommended filaments: Matte PLA or if you prefer Basic PLA, that said, you can use any filament you like as long is not TPU ;)

Characteristics

With anthropometric dimensions between medium and small, it should be good for anyone with hands within this percentile;
It is oriented towards ambidextrous people;
Available with 3 variations: Basic, Ergo and Organic
4 button: Left, right and middle (on the scroll wheel) and a top middle button.

Notes

The mouse needs to be functional and tolerances are not the same has an injection mold parts, so some zones have to be adjusted to better fit the 3D print process, on of does zones is the gap between the buttons and the rest of the shell.
The mouse needs to be 3D printed with the least amount of supports, and none supporting the external shell, this to limits the design
Last, this fits on bambu lab kit (version 002), I've opted not to change their internal chassis, this way you can change tops easily :)

Change Log

11-11-2023 Change to the distance between the pillars and the switches from the left and right buttons.

wireless mouse components kit

Bill of Materials

Bambu parts

Wireless Mouse Components Kit (1pcs)-002

MH002

× 1

Purchase from Bambu Store

Comment & Rating (56)

@JCastaPrints

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in Overture Black CF-PLA with no issues. Made sure to support inner screw channels and middle button post.

The designer has replied

@JorgeRui

The model is nice, but see, when you get the kit in if it clicks ok...

@JCastaPrints

Replying to @JorgeRui :

Yeah it's a great print sir. Just put it together and yes unfortunately not very "clicky" but I don't believe it's the fault of your design moreso the actual left/right buttons from the kit.. if you press them without a shell they don't "click" in general

(Edited)

@JorgeRui

Replying to @JCastaPrints :

Thanks for the kind words and review. My kit button does not click much either. But I have to review this design again. it's not easy to make this mouse shells work with this kind of material (PLA and PETG). A more stiff material will be better, like ABS, but I have to work with the material most of us use daily

@Ariox3D

Hello, you mention that the minimum possible supports, but what type of supports do we put on the ones I indicate in the photo? thank you.

The designer has replied

@JorgeRui

that should be put by the slicer… it is tree supports

@Ariox3D

Replying to @JorgeRui :

perfect... I'll try it, thank you very much

@MartinKozak

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed from Bambu PLA-CF. Waiting for mouse kit, but so far I love it. EDIT: based on testing I found your design to be too long for my hand.

(Edited)

@Kardes.Design

Nice minimalistic model! It feels very good in the hand and printed perfectly!

The designer has replied

@JorgeRui

the model looks very nice

@Leijon

Print Profile

0.2mm layer, 2 walls, 15% infill

looks incredible but the right mouse button was constantly pushed down and all in all the button press doesn't feel that nice, I will play around and heat the mouse up to bend the pla. anyway, I really like it!

(Edited)