为了更好的体验我会保持更新,所以请注意更新时间以免使用了早期的文件
I will keep updating for a better experience, so please pay attention to update times to avoid using earlier files
各位久等了
我优化了模型以获得更好的效果。
目前可能还算不上完美,所以我会继续测试完善努力为大家呈现一个优秀的模型。最后再次感谢各位的支持!
Long time no see. I've improved the model.
It may not be perfect yet, so I will continue to test and refine and try to show you a perfect model.
Thank you again for your support!
1
为了尽量减轻重量推荐使用0.15首层高度(如果可以保证质量也可以使用更低的数值)
In order to minimize the weight, I recommend using 0.15 first layer height
(If you can guarantee the quality, you can also use a lower first layer height.)
2
改变了连接方式(如下图)以提升稳定性,此外你还需要努力找到平衡点(非常重要)
Changed the connection (see below) to improve stability, and you have to work hard to find a balance (very important)
否则你可能会看见这种情况
Otherwise you might see something like this
↑↑↑(update-24.3.1)↑↑↑
1
打印模板
Print template
2
画上你喜欢的图案
Draw any pattern you like
3
将翅膀末端弯曲出弧度并用细绳固定
Bend the end of the wing in an arc and secure it with string
4
像这样在适当的位置打结
Tie the knot in place like this
5
试着放飞吧!
Try to fly!