The Destiny from Stargate
Copyright Claim
The Destiny from Stargate
Boost
71
145
6
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
12.9 h
6 plates
0.2mm layer, 2 walls, 10% infill
34.2 h
10 plates
Destiny Main Weapon 0.2mm layer, 2 walls, 100% infill
41 min
1 plate
Boost
71
145
6
6
226
277
Released
Description
This is my project Destiny where i designed the Destiny from the SGU with attachable Seedship and a stand.
The model is a kit and fits together without any glue whatsoever.
For easier assembly, please take a look at the video series about the project:
https://www.youtube.com/watch?v=bJCTO6jc\_\_s&list=PLyHwaiEHdyZrLYG\_-qljIfkuzycL5RODo
Notes:
Te only part that needs supports are the cannons. Every other piece does not require any supports
Comment & Rating (6)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Great ship, thanks Martin !
some adherence issue in my first try (probably filament), i add brim and it's good.
The original support don't work (do NOTprint it) but i find a pretty support for this ship : https://www.thingiverse.com/thing:5199136 (work perfectly)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
so beautyfull
0
Reply
Absolutely love this model. Already printed one at original scale. About to start an upscaled (120%) multicolor version(the one ybase305 posted). A few tips I recommend from my experience the first time. To help offset the weight of the ship's tail section, print everything forward of the base with 100% infill. Also scale the base up by 1mm on both the x and y axis for a more snug fit.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
love it
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
© 2024 MakerWorld