Update

28-03

• Added name plate holders in 5 different sizes.
• Added grip rings in 3 different sizes.

22-01

• Added bottle holders in 6 different sizes.
• Added spool holders in 3 different length.

19-01

• Added shelf buckets in different sizes.
• Added Pliers holders (3 sizes) facing upwards
• Added Pliers holders (3 sizes) facing downwards
• Added straight hook for hanging up small things (70/54mm)
• Added small hooks

17-01

• Added new insert types
• Added new plate for Shelfs in different length
• Added new plate for different pegs

NOTE: The pegs might have a tighter fit depending on which filament is used. If you find them to tight, slightly trim the edges of the pegs with a sharp knife.
If you find them to loose, cross-cut the edges of the peg with the filament cutter to create a smal indent, creating more friction.

This is a collection of essential tools for 3D printing, all organised on the HSW (Honeycomb storage wall), originaly created by RostaP.

Please see the printing profile for the correct settings. Only adjustment that you could do is to remove the second (top right corner) default purge line to give the grid wall a bit more space. This can be done in the startup G-Code (please be carful)

Other than that each plate and STL has the optimal print settings pre-configured.

Base plate

The base plate with maximum printable size for the X1C, P1S, P1P, A1 of 252x224 mm. For optimal printing, please consider removing the top right purge line from the startup G-Code. (please be carful with altering startup code! if you don't know how to do this just leave it as is.)

Basic set of inserts

This is the basic set of inserts that you could use for a single wall. It contains the:

• Corner inserts, either taking a 3.5mm screw or double sided adhesive tape
• Covers for the corner inserts
• Standard open inserts for holding accessories and pegs

Collection of additional inserts

This is a set of different inserts that can be used to either connect multiple baseplates or different fixtures for accessories.

• 2 way inserts
• 3 way inserts
• 2 way inserts with M3 bolt mount
• single insert with M3 / M4 bolt mount
• 90 degree hook
• Cover inserts for decoration

Basic accessory set

This set gives you mounting brackets for the commonly used 3D printing tools such as

• 3DLac adhesive spray bottle
• Revell glue
• De-burr tool
• Filament cutter
• Bed scraper (For textured plates)
• Bed scraper metal (For smooth plates)

Shelfs

A set of shelf in different length

• 56mm
• 97mm
• 122mm
• 178mm

Collection of pegs

This will be a growing collection of pegs that can be inserts into the wall inserts. Please check from time to time as i'll be creating new pegs and adding them here.

• Wedge pegs
• Angle pegs
• Pliers (down) 1/2/3
• Pliers (up) 1/2/3
• Hooks (thick: single, double) (thin)

Shelf Buckets

A set of different shelf buckets, both enclosed and open front on different sizes

• 60mm
• 160mm
• 210mm

Bottle bins and trays

A set of bottle holders in different sizes including a 100mm strong plate. Tree support is added where needed.

• 20mm
• 30mm
• 40mm
• 50mm
• 100mm
• 100mm double mount

Spool holder

A set for mounting spools in 3 length. Tree support is added where needed.

• 91mm
• 132mm
• 173mm

Name labels

Easy yet usefull addition to the Honeycomb Wall Storage system. Available in 5 different sizes

• 30mm
• 40mm
• 50mm
• 60mm
• 100mm

Grip rings

Useful for gripping round objects. Each is 1mm smaller in diameter than the usual objects, adding extra grip. Also you can choose between a narrow and a wide angle opening.

• 19mm
• 29mm
• 39mm

Enjoy!.