Surging Waves
This is an artwork made using HueForge, which shows the huge waves in winter in the Japanese ukiyo-e style.
Suitable for this 150x150mm frame. https://makerworld.com/en/models/57319
This artwork requires three colors of filament: Dark Blue, Marine Blue, and White.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Dark Blue
At layer #7 (0.64mm) swap to Marine Blue
At layer #18 (1.52mm) swap to Jade White for the rest.