Hope you enjoy the print. Personally I love printing with white as the background since the print comes out looking engraved. Original digital image is not mine.
Instructions and filaments:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to Dark Brown
At layer #8 (0.72mm) swap to Dark Red
At layer #14 (1.2mm) swap to Sakura Pink
At layer #18 (1.52mm) swap to Ivory White for the rest.