Hope you enjoy the print. Personally I love printing with white as the background since the print comes out looking engraved. Original digital image is not mine.

Instructions and filaments:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.6

PLA BambuLab Matte Dark Brown Transmission Distance: 2

PLA BambuLab Matte Dark Red Transmission Distance: 1.5

PLA BambuLab Matte Sakura Pink Transmission Distance: 3

PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:

Start with Charcoal

At layer #4 (0.4mm) swap to Dark Brown

At layer #8 (0.72mm) swap to Dark Red

At layer #14 (1.2mm) swap to Sakura Pink

At layer #18 (1.52mm) swap to Ivory White for the rest.