Trafalgar Law Manga Version 2 from OnePiece for wall art decoration made via Hueforge. 4 Colours are included in 3mf file but can be adapted according to your needs. Take care that 3MF included in print profil has medium resolution due to slicing time that exceeds the limit to upload on makerworld. Therefore it could be printed without problem but if you need the same results that the shared pictures you have to download the STL file and prepare by your own way the colors changement.

It was printed with a 0.08mm as layer height and 0.16mm for the first layer, and 100% infill with rectilinear pattern.

Don't forget to upload your make!

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA PolyTerra Lavender Purple Transmission Distance: 0.5
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Army Blue
At layer #12 (1.04mm) swap to Lavender Purple
At layer #19 (1.6mm) swap to Cotton White for the rest.