Wolfman 1941

It Bites!

Lon Chaney (and Claude Rains)

4 Color Filament Painting in almost 3D

AMS-ready

Easy without AMS:

Profile/STL One, as shown in Picture 1-3:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Beige
At layer #17 (1.44mm) swap to Cream White
At layer #29 (2.4mm) swap to Ivory White for the rest.

Profile/STL Two, without Frame/Title (Picture 4-6):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Tough Cream White Transmission Distance: 10

Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Beige
At layer #20 (1.68mm) swap to Cream White for the rest.
You will get away with 2 Colors (Black-White) on this one, will look just slightly different.