Voronoi Cat by wikiwada

wikiwada

Miniatures>Animals

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 40% infill

Designer

7.7 h

1 plate

3.8(20)

A1 MINI compatible /// 0.16mm layer, 2 walls, 40% infill

Designer

5.7 h

1 plate

2.3(3)

Boost

118

280

624

179

Released

Description

A Voronoi cat model is an elegant and modern representation of a feline figure, created using a unique geometric partitioning. The sculpture is a three-dimensional structure that is characterized by the Voronoi diagram pattern, where the surface is divided into distinct, irregularly-shaped cells that are tessellated to form a cohesive whole.

Comment & Rating (29)

@GreedEagle

Print Profile

0.16mm layer, 2 walls, 40% infill

This did not stick to the bed at all. I was away from home and luckily decided to check on it. it was about half way done when I stopped it.

(Edited)

The designer has replied

@wikiwada

Thank you for your feedback, I will upload an updated model with the bottom part being full instead of voronoi style as the rest of the model. In the meantime, you can try to use glue to ensure enough adhesion is present.

@user_2567237706

Same happened when I just tried to print

(Edited)

@user_999074477

Replying to @user_2567237706 :

Just cut first 0,6 mm of model and then it is working fine, without it it is just standing on few dots on pad, quite easy fix, Otherwise really nice model.

@kerem.oezdemir9

Print Profile

0.16mm layer, 2 walls, 40% infill

Printed in gray (Sunlu PLA+) and in pink (Bambu Lab PLA Basic) both with Standart Bambu Lab PLA settings and both of them came out perfectly!!!

@nmelinat

Print Profile

0.16mm layer, 2 walls, 40% infill

Nice in black PLA+

@kevin.dkpcs.gra

I would love to print this, but for some reason I cannot get the X1C to print this on a glued smooth plate or textured PEI plate, will fail every time I try.

@user_999074477

You have to cut around first 0,6 mm of model otherwise it is just floating on few dosts on pad. With this fix it is fixed nicely to pad with 100x bigger area.

@dinodoug

Print Profile

0.16mm layer, 2 walls, 40% infill

Very cool!

@thecool

Print Profile

0.16mm layer, 2 walls, 40% infill

exploded

@salperpri

Print Profile

0.16mm layer, 2 walls, 40% infill

easy to print and looks very good

@user_999074477

Very nice model, only higly reccommend to cut first 0,6 mm of model otherwise it is just floating on pad on few dots and then is big problem with adhesion. Maybe author could upload fixed model and save some frustration for others :)