"The Eternal Listener" is a 3D relief artwork that features a serene human skeleton with headphones, set against a backdrop of classical, swirling patterns and architectural elements. The skeleton is adorned with elegantly draped cloth, and the entire composition has a monochromatic, stone-like texture, giving it an ancient yet timeless quality.

The artwork is original and the model was rendered in Hueforge. The design has some serious depth and detail which can be printed with a 0.4mm nozzle with only 4 colours.

Note:

1. Whilst this model has been optimised, slicing will take some time. Please be patient.
2. If printing with an enclosed printer, you should print this model with the door open or the top vented.

Colours Needed for print:

• Black (slot 1)
• Beige (slot 2)
• Grey (slot 3)
• White (slot 4)

Filaments Used in Model Pictures:

• Bambu Lab PLA Metal / Iron Grey Metallic (in place of Black)
• eSUN PLA+ / Bone White (in place of Beige)
• SUNLU PLA+ / Grey (in place of Grey)
• ZIRO PLA / Marble Filament (in place of White)

Swap Instructions (3MF should already contain these steps):

• Start with Black
• At layer #10 swap to Beige
• At layer #16 swap to Silver
• At layer #24 swap to White

Thanks to DonMatis whose artwork Listening Music in the Frame inspired this design.