Liebherr T284 mining Dump Truck- Fully 3D printable (version without CAT excavator) by mikolaj.mazik

mikolaj.mazik

Education>Engineering

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

17.6 h

4 plates

3.9(11)

No AMS, 3 color 0.16mm layer, 2 walls, 15% infill

24.6 h

7 plates

4.5(2)

Boost

470

789

1.3 k

335

Released

Description

I present to you the result of 3 weeks of work, the Liebherr T284 mining dump truck, which is designed in a way that allows it to be printed entirely in 3D.

This is the first prototype, prepared for gluing with plastic glue, subsequent versions will have versions with screw holes and movable front wheels. A remote-controlled version will appear in the future. Not all tolerances may be correct.

Assembly instructions will appear within 2 days.

Feel free to scale it up or down, if so, you may need to use toothpicks or something like that as an axis.

Comment & Rating (44)

@sral6991

awesome model! I had some issues with printing and had to adjust it. overall very nice 👍

The designer has replied

@mikolaj.mazik

Thanks! And thank you for the photos😀

@Rohovich

Print Profile

No AMS, 3 color 0.16mm layer, 2 walls, 15% infill

I used 8slawek8 print. I didn't put in the hoist cylinders and there were 2 parts that I haven't figured out where they go or I guess more, thier purpose in pic one. anyway great model looks awesome. I wish the hand rails were thicker or more stable. I could not fit them in their designated holes which makes them very unstable. the axles were very tight so I drilled out the inside duely tires and slid them on the axle and then just put on the outer which are super tight fit.

(Edited)

@8slawek8

Great model. I made some minor corrections to the printout and added a profile :)

The designer has replied

@mikolaj.mazik

Thank you😀

@OzzyMuppet

Incredible quality model.

The designer has replied

@mikolaj.mazik

Thanks!

@KenPrint3D

Replying to @mikolaj.mazik :

very nice model, unfornutly your print profile does not have an actual printed picture wich is need when you want a print profile... other then that you can post raw models :) thanks for sharing tho.. but i dont know if its actually printable

@mikolaj.mazik

Replying to @KenPrint3D :

I am currently printing it and it seems to be fine. I will post results and updates as soon as i will have finished model

@cblab

Amazing model I love it. everything fixed perfectly. I didn’t had any issues or problems. I wanted just to thank you for this great job.

@e.deleon

Cool model. I printed everything and am trying to put it all together. Do you have any info on how to put it together? Im having trouble with the tires and the back dump lifting mechanism. For the tires, do they just fit onto the axel? The axel is much bigger the the tire hole @mikolaj.mazik

The designer has replied

@mikolaj.mazik

hi, axles should be the same size as tires and they are in my print. The clearance is externally small and some force is required to assemble them but it is doable. if you have any problems, I can modify files and send them to you. Tommorow I will post assembly instruction.

@e.deleon

Replying to @mikolaj.mazik :

maybe I printed the wheels at the wrong scale? I don't remember doing this but the wheel are very small. I printed young the designer profile