PTFE Tube remover for A1 mini- remove the tubes from the tool head and AMS Lite
Copyright Claim
PTFE Tube remover for A1 mini- remove the tubes from the tool head and AMS Lite
Boost
30
66
31
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
13 min
1 plate
Boost
30
66
31
0
162
132
Released
Description
If you find removing the PTFE tube from the tool head inconvenient, you can print this model to assist with the operation
This is an slightly improved version (1mm bit more loose) of the PTFE Remover tool provided in the official BambuLab FAQ page here : https://wiki.bambulab.com/en/a1-mini/manual/faq
How to use : slide in the ptfe bowden tube, when you want to disconnect use the tool to apply pressure and pull to release the cable
Comment & Rating (31)
All
Haven't used them but they go well with my "AMS tower caps" :D
I was not able to unclip the PTFE tube that was on the side with the hotend. Is that even possible?
The designer has replied
0
Reply
you need some practice as its not easy normally,and is expecially difficult without those clips
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed these to help remove the ptfe tubes on my A1 mini. They came out very good.
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Correcto
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
A cool little helper!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I don't feel like these reduce the difficulty of removing the PFTE tubing.
The designer has replied
0
Reply
thanks for the feedback, just try without it and you will see the difference :-)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed very good and I printed it remotely.
thanks for the model.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Prints perfect.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
solid addition to the ams lite for the a1/mini
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Quick to print and work great.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
worked perfectly
0
Reply
License
This work is licensed under a
Creative Commons Public DomainRelated Models
© 2024 MakerWorld