The Fast and the Furious Fudge - Spiral Fidget Toy by NUKDDD

NUKDDD

Toys & Games>Other Toys & Games

GIF

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Fuzzy Fast Fudge 0.2mm layer, 2 walls, 7% infill

Designer

46 min

1 plate

5.0(31)

HEAVY Fuzzy Fast Fudge 0.2mm layer, 2 walls, 40% infill

Designer

55 min

1 plate

4.8(12)

A1 Fuzzy Fast Fudge 0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.9(9)

Smooth Fast Fudge 0.2mm layer, 2 walls, 7% infill

Designer

43 min

1 plate

5.0(6)

Click to see more

Boost

168

257

553

344

Released

Description

UPDATE 11/11: Added a print profile called "HEAVY Fuzzy Fast fudge", 40% infill for the fudge body, 15% on the pole, adds a bit of heft while not too heavy to torque itself out of your hand. *A Greek Doric column stand is now available for this so its tip isn't so high in the sky when you're not fidgeting with it.

Nothing else needed, print in place, no support with fuzzy skin turned on. Don't like it fuzzy? I got you covered too 😉

The mechanism is super smooth regardless which shit you're into.

"I thought I was done with this but it keep pulling me back!" - thoughts of everyone fidgeting with these little dollops of fudge.

There are 2 versions, fast and slow, although both are pretty fast but one is faster, so I guess the more appropriate names for them should be Fast and Furious 🥁 gotta catch 'em all! AM I RIGHT!?

This aint your cup of tea? give me a like for the lolz and check out my other fudges here, here and here. Skipped your coffee today? Consider passing it on to me 😏

Comment & Rating (71)

@user_67278359

Print Profile

Fuzzy Fast Fudge 0.2mm layer, 2 walls, 7% infill

✨️💩💩💩💩💩✨️

@CircuitLaunch

Print Profile

A1 Fuzzy Fast Fudge 0.2mm layer, 2 walls, 15% infill

Profile prints fine. You should probably print it larger, it needs some tweaking to be more fun and spin longer or more

The designer has replied

@NUKDDD

Thanks for your comments, check out https://makerworld.com/models/84366 it’s smaller with a ball on it but with twice the turns. try it out!

@barbasnoo

Print Profile

A1 Fuzzy Fast Fudge 0.2mm layer, 2 walls, 15% infill

Printed great!

@Troni73

Print Profile

Fuzzy Fast Fudge 0.2mm layer, 2 walls, 7% infill

funktioniert wie es soll.

@MengPrints

Print Profile

Fuzzy Fast Fudge 0.2mm layer, 2 walls, 7% infill

Smooth print, smooth sliding. Perfect modell for filament remains

@kylemraley

Print Profile

Fuzzy Fast Fudge 0.2mm layer, 2 walls, 7% infill

printed well. the textured turd was stuck on the pole at the base, wouldn't move for me. smooth version worked great!

(Edited)

The designer has replied

@NUKDDD

you mean the turd isn’t on the turn? I printed many of these and some with tighter tolerance, none of them came out stuck. Your filament may not be fully calibrated or is very stringy, because these bambu printers are capable of much tighter tolerances. Hope this helps with troubleshooting 🙂

@kylemraley

Replying to @NUKDDD :

no the turd was stuck at the base. just did the smooth version and it's perfect!

@NUKDDD

Replying to @kylemraley :

great 👍 hope you enjoy it. please leave me a like if you haven’t 😊