InfinitySink Enclosure Cutout Guide

InfinitySink Enclosure Cutout Guide

Boost
0
0
0

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 4 walls, 25% infill
0.2mm layer, 4 walls, 25% infill
Designer
59 min
1 plate

Boost
0
0
0
0
0
0
Released

Description

This InfinitySink install guide is made for the popular electric skateboarding heatsink available from here:

https://forum.esk8.news/t/infinitysink-universal-heatsink-top-mount-boxes/41869

 

These are not super common nowadays, but there are quite a few out there. Someone may find this useful, but either way, this design was adapted from my top-mount ESC box lid, and cut down to use as an enclosure cutting guide. You may buy this top mount enclosure, named ESCHome Modern here:

https://www.pevcomponents.com/product-page/esc-home-modern

 

The InfinitySink Variant will be available shortly.

 

Printing for this model is very simple. I recommend 2-3 walls minimum for rigidity and 20-25% hex or stronger infill. I used PETG for mine, but most filaments will work just fine.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more