Dremel tool holder ( old version )
Copyright Claim
Dremel tool holder ( old version )
Boost
72
161
13
Print Profile(1)
0.2mm layer, 2 walls, 20% infill
Designer
7.9 h
1 plate
Boost
72
161
13
1
146
72
Released
Description
Note: This is the old version. you can find a new refined version here: https://makerworld.com/en/models/192429#profileId-212639
Here is my attempt of making a Dremel tool holder. Hope someone else can make use of it too.
The screw holes fits Biltema`s peg board.
Support: yes.
Infill: 20%.
Comment & Rating (13)
All
Print Profile
0.2mm layer, 2 walls, 20% infill
Printed perfect & great design! Thanks!
The designer has replied
1
Reply
Thank you. Much appreciated. :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Good one
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Great model, printed very well on my P1S and suits the needs for my Dremel tools and their victims ;-)
Thanks to the maker!
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Einige Probleme beim Druck, beim 3. Anlauf klappte es dann aber
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
shelves on the bottom did not print well
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
(Edited)
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld