FOSBOS - EMPTY BIN Remixed by batsma

Remixed by

batsma

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill, Arachnea Walls, no Brim

Designer

56 min

1 plate

5.0(2)

Boost

Released

Description

Free Open Source Bambu Organizational System

FOSBOS is an completely free organizational system, every model is open sourced including both fusion 360 file and the step file. All the drawers are designed after the gridfinity standard.

This model is a bin for storing your loose stuff that fits in any of the drawers that is at least 4u high.

The model is a cut and paste of the Glue-Stick Bin originally made by asdfgasdfg. I needed a bin which fit in the FOSBOS and since I don't have any 3d modelling software i hacked this together in Bambu Studio Slicer.

The size is 1x3x4u high

For the full FOSBOS system, take look over (here)

Comment & Rating (5)

@Camel_Racer

Hi - just a FYI because FOSBOS is based on gridfinity you are able to use any Gridfinity bin you like. Here is a link to nearly every size bin you could ever want - no 3D modelling required. https://www.printables.com/model/616847-ultimate-collection-gridfinity-bins-without-holes-/files Hope this helps!

The designer has replied

@batsma

Thanks dude, i kinda knew that but validation always helps. The main concern I had is that it appears the FOSBOS system has different height. i'm not sure it has, but to me it appears to be. So te be safe and not having to reprint it i made/hacked this model.

@Camel_Racer

If you use a 4u high drawer, a 4u high bin will fit perfectly. If you want the bin to be lower than the drawer (e.g. you want to stack them, or have something overhang the top) then you can print smaller heights. But in summary the drawers are perfectly matched to the bin heights.

(Edited)