Ahsoka Tano, HueForge filament painting.
CAN BE PRINTED ON SINGLE COLOR PRINTERS
PRINT SETTINGS:
Print at 100% infill with a layer height of 0.09mm with a base layer of 0.17mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 3.5
PLA Kexcelled Lake Blue Transmission Distance: 0.6
PLA Kexcelled Gray Transmission Distance: 0.8
PLA PolyLite White Transmission Distance: 3
Swap Instructions:
Start with Black
At layer #6 (0.62mm) swap to Brown
At layer #8 (0.8mm) swap to Lake Blue
At layer #9 (0.89mm) swap to Gray
At layer #12 (1.16mm) swap to White for the rest.