Sunset Tree HueForge (Black,Red,Orange,Yellow,White or 4 Color without White)ams by geschmolzenesplastik

geschmolzenesplastik

Generative 3D Model>Hueforge & Lithophane

Print Profile(0)

No Print Profile yet. Add one to earn points.

+ Add Print Profile

Boost

Released

Description

Nozzle 0.4mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Red Transmission Distance: 6
    PLA+ Sunlu Orange Transmission Distance: 5
    PLA+ Sunlu Pure Yellow Transmission Distance: 5
    PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #11 (0.96mm) swap to Orange
    At layer #16 (1.36mm) swap to Pure Yellow
    At layer #20 (1.68mm) swap to White for the rest.

AMS 4Color Version:

Nozzle 0.4mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #11 (0.96mm) swap to Orange
    At layer #16 (1.36mm) swap to Pure Yellow for the rest.