Dryer Mount Sunlu / Jayo S1 with or without AMS Riser X3D-v3 by cm3dshop.de

cm3dshop.de

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 10% infill gyroid

Designer

7.7 h

3 plates

4.9(31)

Boost

199

394

418

334

Released

Description

Dryer Mount for the old but gold Sunlu / Jayo S1 Filament dryer.

Allows you to bring the Dryer about 22cm from ground and near the filament entry. Included Holes for Allen Keys (2,5 ; 2 ; 1,5)

Drawn 2 Options:

Option A : When you do not want to use X3D-V3 Riser you can support the Dryer Mount with the pillar (to the ground) (5 Screws M3 needed, see picture)

Option B: When using the X3D-V3 Riser (maybe V2 also fits) you can get your dryer hanging in the air by using the Arm (4 Screws M3 needed)

When using the rigth direction all parts can be printed without supports.

UPDATE: added Dryer Mount Base V3 because V2 was without one hole for the pillar screw.

Comment & Rating (46)

@darkneon2002

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

Option A for me because of the enormous poop bucket that I have. I actually remixed it to fit my eSUN dryer. The prototype has some superficial things to improve. I hope to post the remix tonight! It have a cradle of 11cm by 23.5 cm with a straight side off 5 cm (4.33*9.25*2 inches), it will fit most branded filament dryers!

@phaizzle1

let me know when you do! i need it!

@darkneon2002

Replying to @phaizzle1 :

It's available now

@WazzZ

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

Mirrored this and mounted it to the right of the X1C. Works Great! TY for the model!

@TDMPro2K

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

very good strong, fitted well

(Edited)

@giaimef

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

Simple print. However most of the suggested screws are too little: I suggest a minimum M3x12 for the spool holder part

@Blast3dPrints

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

doing its job and serving its purpose. cleaned up some desk space by moving my dryer to the left of the printer. I’m not sure why but mines not sitting flush against the machine. is it a design flaw or a printing flaw? please let know and I’ll reprint. excellent work and thank you.