Printable 3D star as Christmas tree topper in dodecahedron shape.
Easy to light up! G4 holder integrated. Suitable e.g. https://amzn.to/3iuMV3x
Alternatively also with LED Stripes or similar Light Source.
Print Required:
11x Tips
25x Connectors
Now you have 2 Options
1x Bottom to put over the tree
1x Hanging Top with Hole for Cable or String
I add a 3mf File with 2 Plates (All Spikes, Connectors) in normal print mode and a 3mf File with 3 Plates (Spikes,Top,Bottom) in Spiral Vase Mode, here you have to print the spikes 11 times.
Diameter assembled approx. 240mm
Tip length approx. 90mm
Assembly
Push the Connectors in the slots, to hold 2 tips together.
You can use some glue if you want. Use flat-nose pliers for the last pieces, if you have thick fingers like me. 😊
The last tip is the “bottom” or “hanging top”, you just press it in. It should stop on its own.
So you can light it up with G4 or other light source.
Happy Printing 😊👍
I hope you like the parts and it would be great if you follow me and check out my other projects!🧐
Update:
16.11.23 Changed Clearance from Connectors
Commercial license you can get here: