xTOOL F1 FIXTURE FENCES & HOLD DOWNS by APXLVLDZN

APXLVLDZN

Tools>Other Tools

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

26 min

1 plate

5.0(4)

0.2mm layer, 2 walls, 15% infill

Designer

40 min

1 plate

5.0(2)

0.2mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

5.0(2)

0.2mm layer, 2 walls, 15% infill

Designer

27 min

1 plate

Click to see more

Boost

Released

Description

Fixtures I designed to work with my xTool F1 laser.

Comment & Rating (12)

@steeve

Print Profile

0.2mm layer, 2 walls, 15% infill

printed very well . though I think I may remix it with larger holes and use on my desktop cnc.

The designer has replied

@APXLVLDZN

thanks for the feedback, feel free to remix for sure, I've been pretty busy, if you can't figure it out you can send me you parameters, hole sizes and c-c and I'll see if I can't find the time to make what you need!

@nbernhar

Print Profile

0.2mm layer, 2 walls, 15% infill

Great design and print profile, thank you! Works flawlessly with the xtool F1. I used 8mm long M3 thumb screws which are just long enough to reach into the holes below (slightly longer might be beneficial).

The designer has replied

@APXLVLDZN

thanks for the feedback, yeah I may adapt and make some a little thinner maybe 3mm or 4mm, vs 6mm currently.. I just matched the thickness of that near useless fence they provided with the F1. Happy Making!

@steeve

Print Profile

0.2mm layer, 2 walls, 15% infill

very good print. I would like to see. bigger hold though so I can use on my c c as well but that is my issue not the print quality at all.

@coltonleemiller

where do you get the extra screws from?

The designer has replied

@APXLVLDZN

They're M3 thumb screws, you can purchase on Amazon, McMaster Carr, or Home Depot may have some also. Legs are 6mm thick same as the right angle piece they provide with the machine. so ensure they're long enough to make it the whole way through.