My original AEG 18v Blower attachment broke the clips off and kept falling off so I decided to design and print my own. I mean why not as that's what 3D printing is all about right? :D

I designed this one 150mm long so you can have a short attachment or you can print as many as you like to reach your preferred length. For me two was perfect.

Printing details

• Printed using 0.4mm nozzle
• 0.20mm layer height (15-20% infill)
• 4 wall loops(min 3)
• Supports needed: Yes
  (* Using BambuStudio/OrcaSlicer-I painted manual supports on bottom rim overhang and each of the overhangs where the clip is. I used Snug style support to minimise printing unnecessary waste material. See photos samples)
• Filaments: All
• Print orientation: Standing upright(see photos)

Printed using

• Bambu Labs X1 Carbon 0.4 nozzle & Elegoo Neptune 3 Pro & 0.4mm nozzle
• eSUN PLA+ Orange
• Bambu Studio v1.8.2.56 & OrcaSlicer v1.8.1

There's a .25mm tolerance clearance between printed part and the blower and the initial fit might be a little snug. Take part on and off a couple of times and it should free up ok. If not then let me know and I'll add some additional tolerance clearance.

I'm working on additional round and horizontal nozzle attachments which should be finished soon so watch this space. :)

Enjoy and happy 3D printing!