Print Head Tube Guide Upgrade for X1
Copyright Claim
Print Head Tube Guide Upgrade for X1
Boost
14
41
9
Print Profile(1)
0.12mm layer, 2 walls, 100% infill
Designer
17 min
1 plate
Boost
14
41
9
1
119
75
Released
Description
This model is a tube guide upgrade on the X1 to help with filament errors during material switch. Ideally, the material should be high strength and resistant to creep under long exposure to high temperatures. I gave it enough support structure to work with PLA, but PLA will creep over time. For best results, try a material resistant to heat: PC, PA6-GF, PET-CF, PAHT-CF, PA6-CF.
Comment & Rating (9)
All
Print Profile
0.12mm layer, 2 walls, 100% infill
came out perfectly.
0
Reply
I try other bigger models but I star to have problems the nozzle just print out of the first layer, but with this model everything is good is the same sizes of the original and don't disturb with any sensor, good job
1
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
(Edited)
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld