Anti-Stress Ring
Copyright Claim
Anti-Stress Ring
Boost
1
6
6
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
13 min
1 plate
0.2mm layer, 2 walls, 15% infill
12 min
1 plate
Boost
1
6
6
0
25
33
Released
Description
This is a Anti-Stress Ring or fidget toy I made.
For the smoothest rotations you should print this in ABS or any other smooth material.
It also prints well in PLA and PETG but the friction will be higher.
It has an inner diameter of 17mm.
If it doesnt rotate after you print it, check your printer settings for any problems.
This is a print in place ring so it does not require any assembly!
Comment & Rating (6)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:Hält nicht auf der Druckplatte!
The designer has replied
0
Reply
I have made more than 2 dozen of the exact same ring and have had 0 trouble with bed adhesion. Perhaps the settings on your printer are not as calibrated as mine is. Please try again and let me know how it went!
0
Reply
Works good!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld