设计的一款适用于1.75耗材的四路分流器,可以连接四个耗材,并简易地从一个出口中出来,方便没有AMS的竹友快速更换耗材。进线端采用M8*1.0的螺纹,用PC4-M8*1.0直通快速接头,穿过PTFE铁氟龙管到里面,出口采用PC4-M8*1.25非直通快速接头,连接拓竹P1S,P1P等打印机耗材入口。模型为STP,可以自行根据需求更改螺纹。为使螺丝更顺滑,建议螺纹部分采用0.12或更小的层高打印
新版本,不需要使用快速接头:bambu AMS Lite spliter 五通组件 来自 asianlth - MakerWorld
如果需要6路分流器,可以查看以下链接:6way splitter/ams lite splitter/六路分流组件 二次创作 - 来自 asianlth - MakerWorld
A four way splitter designed for 1.75 consumables, which can connect four consumables and easily come out of one outlet, making it convenient for bamboo friends without AMS to quickly replace consumables. The inlet end adopts M8 *1.0 thread, and PC4-M8*1.0 straight through quick connector is used to pass through PTFEpipe to the inside. The outlet uses PC4-M8*1.25 non straight through quick connector to connect to the inlet of printer consumables such as Tuozhu P1S and P1P. The model is STP, and the thread can be changed according to the needs. To make the screws smoother, it is recommended to use 0.12 or smaller layer height printing on the threaded part