A simple itx case,BAMBULAB P1P PRINTER or any printer with the build volume larger than 256*256mm*20mm RECOMMENDED.

Compatibility:
GPU SPECS:250MM GPU OR SHORTER WITH LESS THAN 135MM WIDTH.
CPU COOLER:MAX HEIGHT 135MM
MB:17*17CM，17*19CM，17*21CM
 

Prepare: 400g+ ABS FILAMENT(if you dont need a riser(the file BTM.stp))/500g+abs

OR 600g/750g+ petg FILAMENT
Knurled nuts: M3*3*4.5 14 pcs 
SCREWS: M3*16 4pcs
M3*10 6pcs
at least

VERSION: 0.1

VER 0.2 is cancelled for some structure problems,However a new chassis will be published soon,sorry for put off too long.

Screws are annoying,so the new one in design is trying to avoid visible screws.

ITX/MINI-DTX 3d打印直插SFX机箱
兼容性：25cm长度显卡，宽度135mm。塔式散热器135mm。ITX/MIDI-DTX主板 17*17，17*19，17*21
安装需要: 400g+ ABS耗材（不打印底座（可竖放用））/500g+ABS耗材

滚花螺母: M3*3*4.5 14 pcs 
螺丝: M3*16 4pcs
M3*10 6pcs
至少以上数量螺丝

暂未设计开关位置，可自行加装

版本: V0.1

0.2版本由于一些结构问题被取消，不过好消息是新版本的机箱在不久后就会发布，抱歉拖了那么久

螺丝露出来着实不好看，新设计会试着隐藏螺丝

BY:C4talyst  -8th FEB 2024