An sich ein toller Remix, jedoch mit dem entscheidenden Designfehler, dass sich die Rollos nicht gleichzeitig zu 100% öffnen lassen, da die Rollos hinten aufeinanderprallen. Im Original sind die Laufschienen versetzt.

I figure this is probably a bug in the new bambu studio, but I thought I'd mention... When I open your print profile, there are floating parts with no supports. It slices with no error or warning for some reason despite this. Make sure you enable supports for the floating parts if you print this! Edit: This seems to only apply to Plate 1. Looks like that part doesn't have supports painted like the other parts do.

"Works", but took a lot of extra effort, patience, and material. If you're looking for a riser that can be open/closed, I would look elsewhere (I plan to replace). The sliding doors are extremely flimsy, and needs to be sized down and smoothed to fit in the rails properly. The fitment for the frame parts and pegs is not super. I printed half the frame pieces before realizing there were bad meshes and had to reprint due to the rail being obstructed, blocking door (but they fixed that since).

Coole Erweiterung, hat von Anfang an gepasst

Great concept, no parts you can loose to close the ventilation. I had to increase build plate temp for ABS to 110°C, due to warping. Now it's printing well (except the internal overhangs for the LEDs are not so nice looking). Maybe I should have reduced the nozzle temperature a bit (270°C)? They looked good with the build plate at 80°. Still printing... and waiting for the LEDs to arrive.